Well actually this could be a good idea. But first of all I should find a job and after that I must obtain all the required permission to work in Australia. Remember that I live in Switzerland (not EU) so all these things are always more complex than usual. But hey, if you hear something let me...
Thanks for your reply.
Well after 3 years I can say that things are gone from bad to good. I started as a system engineer and now I'm network engineer. I work for a company that really understand what you can do and help you to improve even more in your job.
I admit, I would like...
use the SYSTEM account, check run with highest privileges and still with run also if user is not logged on.
if this doesn't work, the try to add /f to your batch.
also check if the user as the privilege"log in as a script"
The point is: if the "run as administrator" is hardcoded into the app you can do anything. I had the same problem with just one application. It check the privileges of the user at startup and if it wasn't in admin's group, then the app wont work :/
Hi. You aren't really precise. If I understand correctly you are trying to connect one pc to that server via VPN. Are you using Windows's integrated VPN or a specific software (like Cisco VPN client)? Anyway by default the VPN connection is used to connect to a specific network AND the internet...
Use this command:
w32tm /resync /rediscover
If it doesn't work please post the output of:
w32tm /query /status AND enable this:
w32tm /debug /enable /file:
And redo a resync, then post the output of that log file.
YOu have a policy which is blocking that program.
You should have something here:
(POLICY [local or domain]) Computer Configuration > Windows Settings > Security Settings > Software Restriction Policies
Remove any policy that blocks your program and then you should be ok. If the issue is not...
line vty 0 1
Means that 2 telnet sessions require authentication with Cisco password.
line vty 2 4
Means that you CANNOT use these connection.
You need to logout of each telnet session.
it sounds like a bug to me...
Try to update the firmware first (good luck ... hard to find but try with google or similar).
Then post a show run before and after restart.
PS: you don't need copy run flash, just wr mem & copy run start ;)